Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Aurion
    4. : How to deactivate the traction control on a Toyota Aurion.

Toyota Aurion - Video tutorial

Model: Toyota Aurion Xv50 - Years 2011-2017
Operation: How to deactivate the traction control on a Toyota Aurion.

Disabling the traction control on a Toyota Aurion from the dashboard is quite complicated. However, there is an alternative method that is much simpler and involves the pedals. Let's see it in our video. Press and hold the brake pedal for about 20 seconds. Then release it and start the engine. Press the accelerator and clutch alternately several times. Release the pedals and check the dashboard. We will see that the traction control light has now turned on. To turn it off, we just need to repeat the entire procedure in reverse.


Posted on 31 May 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos