Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light in a Toyota Tacoma?

Model: Toyota Tacoma N300 - Years 2016-2026
Part: Service warning light

In this tutorial, you will see how to reset the oil service light in a Toyota Tacoma, a very simple operation that can be done in two different ways. Before doing this, you should have completed all required maintenance tasks. For the first method, for models equipped with an LCD display, turn on the ignition, then go to the general settings, select "Maintenance Reset," and confirm the reset. For the second method, set the trip meter to "Trip A," turn off the ignition, and turn it back on while holding down the indicated button.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service Light on a Toyota Tacoma?
How to Reset the Oil Service Light on a Toyota Tacoma?
Toyota Tacoma (2005-2015 / N270, N260, N250, N240, N220, MK 2) Resetting the oil service light on a Toyota Tacoma is very simple. Follow these steps in this tutorial. This operation should only be performed after…
How to Reset the Tire Pressure Light on a Toyota Tacoma?
How to Reset the Tire Pressure Light on a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To reset the tire pressure light on your Toyota Tacoma, first inflate the tires to the correct pressure: this value is listed on the sticker affixed …
How to Reset the Maintenance Light on a 2020 Toyota Tacoma
How to Reset the Maintenance Light on a 2020 Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) To complete the reset of the maintenance light on the instrument cluster display of your 2020 Toyota Tacoma, simply follow the steps described below.…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos