![]() |
Do it yourself
| |||
|
Toyota Auris - Video tutorial
Model: Toyota Auris
E210
- Years 2018-2024 To proceed with the replacement of the battery for the remote control key of a Toyota Auris car, you will first need to remove the metal key contained inside the casing. Press the button located on the side edge of the remote control, this will allow you to extract the key. At this point, use the tip of the same key to open the casing; insert the tip of the key into the groove on the upper edge of the casing (short side) and lever it open. You will now have access to the battery compartment, remove the cover on it and proceed with the extraction and replacement. The required battery model is a CR 2032 flat type with 3V.
Posted on 14 July 2023 by ScegliAuto
![]() Toyota Auris (2007-2012 / E150) Are you unable to replace the battery in your remote control key? Let's see how to replace the key battery on Toyota Auris: we take our remote contro ![]() Toyota Auris (2007-2012 / E150) To replace the Toyota Auris remote control battery, press the button that allows you to remove the key from its housing. Using the key itself, it wil ![]() Toyota Auris (2007-2012 / E150) In order to replace the Toyota Auris remote control battery, you need to extract the key from the top of the device, pressing the appropriate button Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the Renault Master AdBlue warning light![]() If when you turn on the ignition you see a strange warning relating to AdBlue, do not worry because it is nothing serious. Everything is solved in a few minutes and with a very low cost. In fact, it is a particular additive used in Diesel engines to reduce the environmental impact. Before continuing with the various steps it is therefore necessary to purchase a tank of AdBlue. Furthermore, all the various operations must be carried out with the engine off. The AdBlue tank is located on the passenger side, between the door and the tailgate. Unscrew the blue cap present and pour in the new AdBlue with the help of a rubber hose or an appropriate funnel. Once this is done, you can close the tank and the flap. Switch on the ignition again and the warning light has disappeared. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.087
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |