Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a 2006 Toyota Rav 4?

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Car stereo

See other generations:
This video is currently unavailable

The 2006 Toyota Rav 4 comes with an older generation radio as standard. You can replace it with a new, more modern one by following the instructions in the video.

Remove the old radio by taking off the trim that hides the screws. Unscrew the fasteners and pull out the old radio by disconnecting the wiring.

Take the new radio and install it in place of the one you just removed, ensuring the connectors are correctly attached. Finally, reattach the fixing screws and test the operation of your new radio.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Reset the Radio on a Toyota Rav 4 MK4
How to Reset the Radio on a Toyota Rav 4 MK4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this brief and simple guide, discover how to reset the radio on a fourth-generation Toyota Rav 4, as well as on the Corolla. First, open the bonne…
How to Replace the Radio in a Toyota RAV 4 MK3
How to Replace the Radio in a Toyota RAV 4 MK3
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video, learn how to easily replace the radio in a Toyota RAV 4 MK3. Using a plastic trim tool to avoid damaging the dashboard, remove the two…
How to Install the Rear Camera on a Toyota RAV4
How to Install the Rear Camera on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today's instructions will show you how to install the rear camera useful for parking manoeuvres on the Toyota RAV4. First, get into the vehicle and b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos