Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Radio on a Toyota Rav 4 MK4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

In this brief and simple guide, discover how to reset the radio on a fourth-generation Toyota Rav 4, as well as on the Corolla. First, open the bonnet and start removing the plastic cover of the fuse box; then locate the fuse for the radio, so you can replace it if it is blown or faulty.

To reset the radio in your vehicle, try disconnecting the battery terminals (positive and negative) to restore the ECU; reconnect the terminals and check the functionality.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Restore the Radio of a Toyota Rav-4 to Factory Settings
How to Restore the Radio of a Toyota Rav-4 to Factory Settings
Toyota Rav 4 (2013-2018 / Xa40, MK 4) How do you restore the radio of a Toyota Rav4 to factory settings? Let’s see the instructions from our YouTuber. Get into the vehicle, close all four…
How to reset the tyre pressure warning light on the Toyota RAV 4?
How to reset the tyre pressure warning light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) To reset the tyre pressure warning light on the Toyota RAV 4, first inflate the tyres to the correct pressure value, which is indicated on the sticke…
How to Replace the Radio in a 2006 Toyota Rav 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) The 2006 Toyota Rav 4 comes with an older generation radio as standard. You can replace it with a new, more modern one by following the instructions …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos