Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to replace the radio of a Toyota RAV 4 MK3 version.

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa30, MK 3 - Years 2006-2013
Part: Car stereo
Operation: How to replace the radio of a Toyota RAV 4 MK3 version.

In this video, we see how to easily replace the car stereo on a Toyota RAV 4 MK3 version. Using a plastic spatula, to avoid damaging the dashboard, we remove the two side parts of the car stereo. This way, we expose the four screws, which we need to unscrew with a screwdriver. At this point, it will be enough to firmly pull out the car stereo unit from its compartment; we remove the electrical connectors from the device, using a small screwdriver where necessary. Now we can install the radio we have chosen: for example, the code B0B5QXVXDB on Amazon, priced at 169.99 euros, with free delivery for Prime customers. We reattach the electrical connectors, screw the screws back onto the dashboard, and put the side finishing parts of the car stereo back in place. Operation completed.


Posted on 19 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2006-2013 - What problems does the Toyota Rav 4 radio have? Read Answer
    • Rav 4 2006-2013 - How to reset the car radio of the Toyota Rav 4? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos