Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Boot Lid on a Toyota Auris?

Model: Toyota Auris E150 - Years 2007-2012
Part: Checks and maintenance

In a Toyota Auris, the boot lid may become stuck due to a problem with the lock or its mechanism. In this case, you can perform an emergency manual opening by following the procedure shown in this tutorial. First, go to the rear seat, then operate the indicated lever and fold down the backrest. Next, locate the small panel on the back of the boot lid, open it using a plastic spatula if possible, and lift the lock catch. At this point, it will be unlocked and you can open the boot lid.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Headlamp of a Toyota Auris
Removing the Rear Headlamp of a Toyota Auris
Toyota Auris (2007-2012 / E150) Do you want to remove the rear headlamp of a Toyota Auris? Here’s how to proceed in this video. Open the boot lid, then use a plastic lever to detach…
How to Replace the Rear Light Bulb in the Toyota Auris?
How to Replace the Rear Light Bulb in the Toyota Auris?
Toyota Auris (2007-2012 / E150) To replace the rear light bulb in the Toyota Auris, open the tailgate to access the boot. Here, detach the left side carpet covering corresponding to…
How to Reset the Tyre Pressure Light on a Toyota Auris?
How to Reset the Tyre Pressure Light on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the tyre pressure light on the Toyota Auris, inflate the tyres to the recommended pressure value, which is indicated on the sticker affixed …

    Frequently Asked Questions

    • Auris 2012-2018 - How much does the Toyota Auris Hybrid cost? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos