Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Lights on a Toyota RAV4?

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
This video is currently unavailable

In this tutorial, see how to replace the rear lights on a Toyota RAV4, a very simple and quick operation. First, ensure the key is not inserted, then open the boot, locate the bolts along the inner edge of the light in question, and undo them using a socket spanner.

Once done, pull the light towards you, detach it from the bodywork, and remove the faulty bulb by turning it slightly anti-clockwise. Finally, insert the replacement, avoiding direct contact with the glass, and reassemble everything.


Updated on 11 August 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on a Toyota RAV4?
How to Replace the Rear Light Bulbs on a Toyota RAV4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In this tutorial, you will learn how to replace the rear light bulbs on a Toyota RAV4, a very simple and quick operation. First, ensure the key is no…
How to Remove the Rear Lights on a Toyota RAV4?
How to Remove the Rear Lights on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this tutorial, you will learn how to remove the rear lights on a Toyota RAV4, a straightforward task if you need to replace a bulb or the entire u…
How to replace the rear headlight bulbs in the Toyota RAV4?
How to replace the rear headlight bulbs in the Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this tutorial, we can see how to replace the rear headlight bulbs in the Toyota RAV4, an extremely simple and quick operation. First of all, make …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos