Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery of a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Key

See other generations:
Video tutorial

In today's tutorial video, you will see the steps to disassemble and replace the battery of the remote key for the Toyota Yaris. First, take your remote and start by unscrewing the screw located on the back casing; then, pry open the sides of the remote to access both the battery and the electronic board, as shown in the video.

At this point, replace the battery with a new one of the correct type (in this case, a CR 2016 3V); then reassemble the remote by screwing in the small screw!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2005-2011 / Xp90) To quickly and correctly replace the exhausted battery in your Toyota Yaris key, you will only need a simple flathead screwdriver. Let’s go through t…
Toyota Yaris (2005-2011 / Xp90) Start by inserting the tip of a flathead screwdriver into the slot on the side of your Toyota Yaris key and lever it open. Then, detach and remove th…
Toyota Yaris (2011-2019 / Xp130) As shown in this video, replacing the battery inside the key of your Toyota Yaris is a very simple operation. First, use a small Phillips screwdriver…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos