Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Proace Verso
    4. : Perform the pressure sensor reset on a Toyota Proace.

Toyota Proace Verso - Video tutorial

Model: Toyota Proace Verso MK 1 - Years 2016-2023
Part: -board computer
Operation: Perform the pressure sensor reset on a Toyota Proace.

If you have replaced the tires or adjusted the tire pressure, etc. After adjusting the tire pressure, you need to reset the pressure sensor. So, get in the car, turn on the engine, and then use the controls located on the central console. Press the MENU button and then scroll with the arrow keys until you find "personalization - configuration" and press OK. Then select "Vehicle parameter settings" and press OK, then go to "Safety" and press OK, then go to "Tire inflation" and press OK.


Posted on 12 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos