Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Venza
    4. : How to replace the cabin air filter of the Toyota Venza.

Toyota Venza - Video tutorial

Model: Toyota Venza MK  1, Av10 - Years 2008-2017
Part: Cabin air filter
Operation: How to replace the cabin air filter of the Toyota Venza.

Today's guide will show us how to dismantle and replace the cabin air filter of the Toyota Venza, following these simple and quick steps. First, we get inside the car and start by opening and dismantling the glove compartment; then we remove the plastic cover that we find at the back, sliding out the pollen filter, as shown in the video. At this point, we install the new cabin air filter, inserting it in the correct direction (usually indicated by arrows printed on the filter itself); then we reassemble the glove compartment!


Posted on 15 September 2023 by ScegliAuto



How to replace the air filter on Toyota Venza?
Toyota Venza (2008-2017 / MK  1, Av10) In order to replace the Toyota Venza air filter, you need to open the hood, so that you can identify the air filter box located in the area to the ri
How to replace the cabin air filter on Toyota Venza ?
Toyota Venza (2020-2024 / MK  2, Xu80) To replace the passenger compartment air filter on the car, it is necessary to follow the instructions below: access the passenger compartment from t
How to replace the air filter on Toyota Venza
Toyota Venza (2020-2024 / MK  2, Xu80) If we intend to replace the engine air filter on this car we can take a look at the video tutorial and the description below. After opening the bonne

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos