Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Toyota Venza?

Model: Toyota Venza MK  2, Xu80 - Years 2020-2026
Part: Cabin air filter

To replace the cabin air filter on the vehicle, follow these steps: access the cabin from the passenger side, open the glove compartment, and unclip the fasteners on the sides to remove it from the dashboard. Behind the compartment is a plastic cover, which is the filter housing cover; unclip this cover and remove the filter. Take the new filter and insert it into the housing (always check the filter specifications to ensure compatibility with the vehicle). Finally, close the filter cover and reinstall the glove compartment.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Toyota Venza?
How to Replace the Air Filter on a Toyota Venza?
Toyota Venza (2008-2017 / MK  1, Av10) To replace the air filter on a Toyota Venza, open the hood to locate the air filter box on the right side of the engine block. Release the retaining …
How to Replace the Cabin Air Filter in a Toyota Venza
How to Replace the Cabin Air Filter in a Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) This guide will show you how to remove and replace the cabin air filter in a Toyota Venza by following these simple and quick steps. First, get insid…
How to reset the service light on the Toyota Venza 2
How to reset the service light on the Toyota Venza 2
Toyota Venza (2020-2026 / MK  2, Xu80) To complete the manual reset of the service light on the instrument panel of your second generation Toyota Venza, you must follow the steps described…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos