Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : How to reset the service light on the Toyota Land Cruiser?

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Checks and maintenance
Operation: How to reset the service light on the Toyota Land Cruiser?

Performing the service light reset on the Toyota Land Cruiser produced from 2007 to 2022 is a simple operation that is carried out after performing the routine maintenance required by the manufacturer. The first thing to do is to get into the vehicle and make sure that all the doors are properly closed. The second thing to do is to press the TRIP button located on the central dashboard, near the steering wheel. While holding down the button, we turn on the instrument panel and wait for the reset procedure to load. Once the loading is complete, the reset will have been successfully performed and we can release the button and turn off the instrument panel.


Posted on 21 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Land Cruiser 2007-2021 - What are the warning lights on Toyota Land Cruiser? Read Answer
    • Land Cruiser 2002-2009 - What are the Toyota Land Cruiser dashboard warning lights? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos