Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Car Bushes

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bushings

See other generations:
Video tutorial

For this job, it may seem more appropriate to consult authorized workshops, but in reality, you can also do it yourself. The following guide shows how to replace the bushes in your car. To do this job, your car should be placed on ramps.

To replace the bushes, simply remove them from the brackets they are fixed to, disconnecting them from the mounting points of the chassis and the suspension. When unscrewing the bolts, be careful to remember their order; otherwise, you may encounter problems during reassembly.

Once the new bushes are installed, simply reassemble everything in the order you memorised.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing the Anti-Roll Bar on Your Car
Replacing the Anti-Roll Bar on Your Car
Toyota Yaris (2005-2011 / Xp90) This guide shows, in its various steps, how to replace the anti-roll bars on your car. To perform this task, you will need to lift the car and secure…
Replacing the Suspension Arm
Replacing the Suspension Arm
Toyota Yaris (2005-2011 / Xp90) The suspension arm of the car connects the chassis to the struts. If it becomes deformed or worn, it needs to be replaced as it could lead to a dange…
Replacing Car Brake Pads
Replacing Car Brake Pads
Toyota Yaris (2005-2011 / Xp90) The following guide shows how to replace the brake pads on your car, requiring a bit of free time and a pinch of patience, along with good manual ski…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos