|
Do it yourself
| |||
| ||||
How to Replace the Brake Light Bulbs in the Toyota Corolla?
Model: Toyota Corolla
MK 5, E210
- Years:
2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
In this tutorial, you can see how to replace the brake light bulbs in the Toyota Corolla, a very simple and quick operation. First, ensure that the key is not inserted, then open the boot and unclip the black plastic cover located on the inner edge of the headlamp in question. Next, unscrew the two securing bolts using a socket spanner, pull the headlamp towards you, and separate it from the bodywork. At this point, you can extract the faulty bulb by turning it counterclockwise, insert the replacement, and follow the reverse procedure.
Updated on 2 September 2026 by ScegliAuto
Related tutorials
Toyota Corolla
(2000-2007 /
MK 2)
In this tutorial, you will see how to replace the brake light bulbs in a Toyota Corolla, a very simple and quick operation. First, ensure that the ke…
Toyota Corolla
(2006-2013 /
MK 3)
In today's video, you will learn how to replace the rear brake light bulbs on a Toyota Corolla. First, obtain a replacement bulb, following the manuf…
Toyota Corolla
(2006-2013 /
MK 3)
In this tutorial, you will see how to replace the brake light bulbs in a Toyota Corolla, a very simple and quick operation. Before proceeding, ensure…
Other guides you may be interested in
|
How to Extract the Spare Wheel from a Mercedes Vito
The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.236
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
