Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service on a Toyota Prius?

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: Service warning light

In this tutorial, you will see how to reset the service on a Toyota Prius, a very simple and quick operation to be performed only after completing all required scheduled maintenance tasks. Start by inserting the key and turning on the ignition, then navigate to the "Trip A" mileage using the "Trip" button on the steering wheel. Once done, turn off the ignition and turn it back on while holding the "KPH/MPH" button, releasing it only after the interval has been correctly reset. Then restart the vehicle to verify that the reset was successful.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Prius (2023-2026 / MK 4, Xw60) Good morning, today’s objective is to reset the "Service" light on your Toyota Prius. Start by sitting in the driver’s seat. Then, by pressing the ig…
Toyota Prius (2009-2015 / Xw30, MK 2) To reset the Service light of the Toyota Prius, you need to press and hold the button located at the top right of the instrument panel, while the pan…
Toyota Prius (2009-2015 / Xw30, MK 2) In this tutorial, you will see how to reset the service in a Toyota Prius, a very simple and quick operation to perform only after completing all sch…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos