Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Toyota Yaris?

Model: Toyota Yaris MK 4 - Years 2020-2026
Part: Tire pressure warning light

To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the optimal pressure value, which is found on the sticker attached to the driver's door pillar. Once the tyres are inflated, enter the cabin and turn on the instrument cluster. Then, press and hold the SET button located under the steering column to make the warning light disappear. After the reset, release the button and turn off the cluster.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Toyota Yaris?
How to Reset the Tyre Pressure Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure light on the Toyota Yaris, first inflate the tyres to the correct pressure, which is indicated on the sticker attached to …
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris?
Toyota Yaris (2020-2026 / MK 4) To reset the tyre pressure warning light on the Toyota Yaris, first inflate the tyres to the correct pressure value, which is indicated on the sticke…
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris xp130
How to Reset the Tyre Pressure Warning Light on the Toyota Yaris xp130
Toyota Yaris (2011-2019 / Xp130) This guide shows how to reset the tyre pressure warning light on the 2019 Toyota Yaris. The reset procedure requires pressing the button located at t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos