Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Aygo

Model: Toyota Aygo Ab10, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tire pressure warning light

See other generations:
Video tutorial

The tyre pressure warning light in the Toyota Aygo is located on the dashboard, specifically within the round speedometer, positioned at the bottom right. It is yellow/orange in colour.

Once the issue it indicates has been resolved, proceed to reset the warning light. To do this, open the glove compartment on the passenger side.

In the top left of the compartment, just above the lid of the small door, there is a button marked "SET". Press and hold this button until the tyre pressure light on the dashboard turns off. This way, you have reset the light, but be aware that if the light is still on, it indicates a problem that needs to be checked and potentially resolved.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Aygo
How to Reset the Tyre Pressure Warning Light on a Toyota Aygo
Toyota Aygo (2014-2023 / Ab40, MK 2) The tyre pressure warning light on a Toyota Aygo can be reset after all tyres have been inflated to the correct pressure value, which is indicated on…
How to reset the tyre pressure warning light on the Toyota Aygo?
How to reset the tyre pressure warning light on the Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) The button to reset the tyre pressure warning light on the Toyota Aygo is located inside the glove compartment. Once opened, you should be able to lo…
How to Reset the Tyre Pressure Light on a Toyota Aygo?
How to Reset the Tyre Pressure Light on a Toyota Aygo?
Toyota Aygo (2014-2023 / Ab40, MK 2) To reset the tyre pressure light on a Toyota Aygo, first turn on the ignition by rotating the key in the ignition switch. Once the display is on, ope…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos