Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. C Hr
    4. : How to reset the maintenance light on the Toyota C-HR.

Toyota C Hr - Video tutorial

Model: Toyota C Hr Ax50, Ax10, MK 1 - Years 2016-2023
Part: Instrument cluster
Operation: How to reset the maintenance light on the Toyota C-HR.

In this new mini guide dedicated to all of you who own a Toyota C HR first series, we will discover how to correctly perform the manual reset of the maintenance light on the instrument panel. First of all, reach the driver's seat and turn on the ignition. At this point, make sure that the "Trip A" option is displayed on the screen, then turn off the ignition and hold down the "Trip" button located on the right side of the steering wheel. Finally, turn on the car's ignition again and wait a few seconds. As soon as the display stops flashing, it means that the reset of the light has been successful.


Posted on 18 January 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Toyota C Hr 2016-2023 - What does the yellow engine light on the Toyota C-HR indicate? Read Answer
    • Toyota C Hr 2016-2023 - What does the service light on Toyota C Hr indicate? Read Answer
    • Toyota C Hr 2016-2023 - What does the AdBlue warning light on the Toyota C HR mean? Read Answer
    • Toyota C Hr 2016-2023 - What are the warning lights on the Toyota Chr? Read Answer
    • Toyota C Hr 2016-2023 - Where are the Toyota C-HR warning lights shown? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos