Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a Toyota C-HR

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part: Warning light – error code

How do you reset the maintenance light on a Toyota C-HR? It’s a very simple operation, let’s see how. Turn on the ignition with the button (you will see the maintenance message), turn off the ignition, turn it back on and press the button on the right of the steering wheel TMP: wait for the maintenance reset. Turn off the ignition with the appropriate button, then turn it back on to check the maintenance status (the light should no longer be on). Always remember to make changes and settings on the Toyota with the vehicle stationary and the engine off.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Maintenance Indicator on Toyota C-HR
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) This guide explains how to reset the tyre maintenance indicator on a Toyota C-HR. It's a very simple operation: enter the vehicle, turn on the instru…
Service reset on a Toyota C-HR
Service reset on a Toyota C-HR
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) In this very short video guide, you will be able to see the entire process necessary to reset the service light on a Toyota C-HR, first series model …
How to reset the maintenance light on the 2019 Toyota C-HR.
How to reset the maintenance light on the 2019 Toyota C-HR.
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To complete the manual reset of the maintenance light for your first-generation Toyota C-HR (2019), you only need a few minutes. All you have to do i…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos