Do it yourself
Frequently asked questions about cars and motorcycles

How to change the air filter on the Toyota Yaris.

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Air filter

In this video, it is shown how to replace the air filter on the Toyota Yaris MK2. In this model, the air filter is located in the engine compartment, behind the cover. Identifying the cover is easy as it is in the center and the engine version is written on top of it. To replace the filter, you need to remove the cover by applying pressure to the appropriate clips and pulling them towards the front of the engine compartment. Once the clips are opened and the cover is removed, you will have access to the air filter to replace it. It is recommended, as shown in the video, to use a compressor to remove dirt from the cover and the filter housing.


Posted on 21 January 2024 by ScegliAuto



How to replace the air filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Replacing the air filter on the Toyota Yaris 1.0 petrol is very simple. First, we need to open the hood of the car and remove the four clips that sec
Replace the cabin air filter on Toyota Yaris XP130
Toyota Yaris (2011-2019 / Xp130) Let's find out the steps that will allow us to remove and replace the cabin air filter or air conditioning on the Toyota Yaris XP130. First of all we
How to replace the air filter on a Toyota Yaris.
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, we can see how it is possible to replace the air filter on a Toyota Yaris, following a few simple steps that will guide us to

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos