Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Driver's Door on a Toyota Corolla?

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Car door

See other generations:
Video tutorial

In this tutorial, you will see how to replace the driver's door on a Toyota Corolla, a very simple and quick operation. Before doing this, remove the front wheel arch liner on the same side to access the hinges.

Start by removing the central rubber cover, then disconnect the large connector and undo the fixing bolt of the limit switch lever. Next, undo the bolts of the lower hinge, repeat the process on the upper hinge, and separate the door from the frame.

To fit the replacement, simply follow the reverse procedure.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Door Panel Replacement on Corolla
Door Panel Replacement on Corolla
Toyota Corolla (2000-2007 / MK 2) Replace the door trim panel on a Toyota Corolla. Remove the plastic cover inside the door handle opening with a trim tool, then remove the handle cov…
How to Silence the Seatbelt Alarm on the Toyota Corolla
How to Silence the Seatbelt Alarm on the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Next, we will illustrate how to temporarily deactivate the seatbelt alarm on the Toyota Corolla; remember to always wear your seatbelt. First, open t…
How to Reset the Tyre Pressure Warning Light on the Toyota Corolla
How to Reset the Tyre Pressure Warning Light on the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) To reset the tyre pressure warning light on the Toyota Corolla, inflate the tyres until they reach the correct pressure value, which is indicated on …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos