Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How do you reset the airbag light on the Toyota Yaris?

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Airbags
Operation: How do you reset the airbag light on the Toyota Yaris?

In order to reset the airbag light of the Toyota Yaris, it will be possible to connect a diagnostic tool to the OBD port of the vehicle: this port will be located in the lower left part of the dashboard compared to the steering column. Once the scanner is connected, it will be possible to select the model of the car in question and its corresponding version: in this way, it will be possible to identify the error and reset it completely. Once the error has been reset, it will be possible to disconnect the diagnostic tool to verify that the light has been reset.


Posted on 20 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2011-2019 - How do you deploy the steering wheel airbag in the Toyota Yaris? Read Answer
    • Yaris 2011-2019 - How do you deploy the steering wheel airbag in the Toyota Yaris? Read Answer
    • Yaris 2011-2019 - What to do if the airbag warning light comes on in Toyota Yaris? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos