Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on the Toyota Sienna

Model: Toyota Sienna Xl20 - Years 2004-2010
Part:

In this mini guide dedicated to your first-generation Toyota Sienna (2004-2010), discover how to manually reset the tyre warning light. First, ensure there are no punctures or tyres inflated to the wrong pressure. Then, enter the cabin and turn on the ignition. Next, locate the "Set" button situated on the lower left side of the dashboard and hold it down for a few seconds. Wait for the reset of the warning light to complete, then release the button. Finally, turn off the ignition, and you are done.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the 2017 Toyota Sienna
How to Reset the Tyre Warning Light on the 2017 Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) In this new mini guide, you will discover the various steps you need to follow to manually reset the tyre pressure warning light on your 2017 Toyota …
How to Reset the Tyre Pressure Light on a Toyota Sienna
How to Reset the Tyre Pressure Light on a Toyota Sienna
Toyota Sienna (2010-2020 / Xl30) This brief video tutorial shows how to reset the tyre pressure light on a Toyota Sienna, model produced from 2010 to 2020. First, turn on the vehicle…
How to reset the tire warning light in the Toyota Sienna?
How to reset the tire warning light in the Toyota Sienna?
Toyota Sienna (2004-2010 / Xl20) In this tutorial, we can see how to reset the tire warning light in the Toyota Sienna, an extremely simple and quick operation to be performed only o…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos