Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : How to reset the oil change on a Toyota Land Cruiser

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Checks and maintenance
Operation: How to reset the oil change on a Toyota Land Cruiser

Thanks to this very short tutorial, we can see how to reset the maintenance light, related to the remaining life of the engine oil, on a Toyota Land Cruiser MK11 model. Let's start by pressing the vehicle's ignition button twice and then pressing the "ODO/TRIP" button, located to the left of the speedometer, until the display shows the "TRIP A" message, then turn off the vehicle. After that, we press and hold the "ODO/TRIP" button and then turn on the vehicle's ignition by pressing the ignition button twice, now we wait with the button pressed for the maintenance light reset to be completed.


Posted on 22 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Land Cruiser 2007-2021 - What are the warning lights on Toyota Land Cruiser? Read Answer
    • Land Cruiser 2002-2009 - What are the Toyota Land Cruiser dashboard warning lights? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos