Do it yourself
Frequently asked questions about cars and motorcycles

Location of the Fuse Boxes for the Toyota Hilux MK8

Model: Toyota HiLux An130, An120, MK 8 - Years 2015-2024
Part: Fuse box

In this video, see that if an electrical component of the Toyota Hilux stops working, you can check if it is due to a blown fuse protecting that component. To verify this, you need to know the location of the two fuse boxes: the first is located in the panel to the left of the pedals. To access it, remove the plastic nut at the base, loosen the trim of the door, and detach the panel. The second is found in the engine compartment on the driver's side, behind the battery, covered by a black plastic lid. To identify the fuse related to the component in question, consult the diagram inside the owner's manual.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota HiLux (2015-2024 / An130, An120, MK 8) In this video, see where the fuse boxes are located and their diagram for the Toyota Hi-Lux MK8 version: the box located in the cabin is to the right…
Toyota HiLux (2015-2024 / An130, An120, MK 8) Following these brief and simple instructions, we will see the diagram and positioning of the fuse boxes of the Toyota Hilux. First of all, we get on…
Toyota HiLux (2015-2024 / An130, An120, MK 8) When you need to work on the electrical system and components of the Toyota Hilux, it is helpful to know where the fuse box is located to perform che…

Other guides you may be interested in

    Frequently Asked Questions

    • Hi Lux 2015-2024 - Where is the fuse for the Toyota Hilux cigarette lighter located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos