Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats in the Toyota RAV4?

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Rear bench seat

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear seats in the Toyota RAV4, a very simple and quick operation. First, open both rear doors and the boot lid, then lower both seat backs by operating the respective levers.

Next, lift the seat base, undo the four fixing bolts indicated using a 14mm hex key, and remove the seat backs themselves. Continue by undoing the bolts of the seat belts, remove the respective brackets, and detach the seat base from the floor.

To install the replacements, simply follow the reverse procedure.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats from a Toyota RAV4?
How to Remove the Rear Seats from a Toyota RAV4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To remove the rear seats from the Toyota RAV4, you need to take off the plastic covers located at the front of the seat tracks. You will also need to…
How to Remove the Rear Seats on a Toyota RAV4 MK5
How to Remove the Rear Seats on a Toyota RAV4 MK5
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this video tutorial, see how to remove the rear seats on a Toyota RAV4 MK5 by following these simple steps. First, open the boot and start by remo…
How to Remove the Rear Seats from the Toyota RAV4
How to Remove the Rear Seats from the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To remove the rear seats from the Toyota RAV4, first, fold down the rear seat backs by pulling the levers located at the sides of the corresponding h…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos