Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on the Toyota Corolla Mk3

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Tire pressure warning light

In this new guide for all Toyota Corolla Mk3 owners, we will describe step by step the various actions to take to correctly complete the manual reset of the TPMS light that appears on the instrument panel. First, take your seat in the driver's position and ensure the ignition is on. Then, locate the "Set" button located at the bottom of the dashboard and hold it down for a few seconds. Once the TPMS warning light disappears from the panel, release the button, and the reset procedure is complete.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on a 2010 Toyota Corolla
How to reset the TPMS light on a 2010 Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) The tire pressure sensor must be reset after adjusting the tire pressure of a vehicle. In some cars, the TPMS light reset is done automatically after…
How to reset the TPMS sensors of the Toyota Corolla
How to reset the TPMS sensors of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) In this guide, we will check the tire pressures and how to reset the TPMS sensors on the Toyota Corolla. To perform this type of check, it is necessa…
Resetting the Tyre Pressure Warning Light on the Toyota Corolla
Resetting the Tyre Pressure Warning Light on the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) These brief steps will show you how to reset the tyre pressure monitoring system (TPMS) warning light on the Toyota Corolla. Before performing the re…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos