|
Do it yourself
| |||
| ||||
How to Install Horns on a Toyota Aygo
Model: Toyota Aygo
Ab40, MK 2
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
In this video, see how to install horns on a Toyota Aygo: you can find them on Amazon with code B00IN0ZSZ6 for £17.49 per pair, with free delivery for Prime customers. Lift the vehicle slightly and locate the original horn, removing the protective plastic underneath to access it. Usually, the original horn has one wire; if it has two, identify the positive. The horns take up more space than the original horn, so you will need to move to the opposite side of the vehicle, and an extension will be necessary. You will need a positive under fuses (15 A), and we added a red wire under the positive terminal, placing the fuse holder on the edge of the cover. The horns are already mounted on brackets with the ground wires connected. Add the relay - which boosts the line - and the button wire, along with the red positive wires. Check the positioning of the horns relative to the vehicle's body. Test if the relay clicks before connecting the fuse. If everything is okay, proceed. See where our YouTuber routed all the wires during the installation.
Updated on 2 October 2026 by ScegliAuto
Related tutorials
Toyota Aygo
(2021-2026 /
MK 3, Aygo X)
In this guide, we will explain the various steps you need to follow to manually reset the oil light on your Toyota Aygo X (2023). First, start the in…
Toyota Aygo
(2005-2014 /
Ab10, MK 1)
How do you remove the radio from your Aygo? Let's look at the removal of the radio and the installation of the new one in the Toyota Aygo. Remove the…
Toyota Aygo
(2021-2026 /
MK 3, Aygo X)
In this brief and simple guide, you will see how to replace the cabin air filter on a Toyota Aygo. First, get inside the vehicle and start by opening…
Other guides you may be interested in
|
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |