Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light on a Toyota Rav4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part:

To reset the tire pressure light on a Toyota RAV4, start by turning on the instrument panel without starting the engine. Locate the reset button located under the steering column. Hold down this button until the tire pressure light on the dashboard starts flashing. Continue to hold down the button until the light stops flashing and turns off completely. This indicates that the tire pressure system has been successfully reset. Turn off the instrument panel and turn it back on to verify that the light has been reset properly. If the light does not turn off, repeat the procedure carefully.

Posted on 19 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on the Toyota RAV4
How to Reset the Tyre Warning Light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To manually reset the tyre warning light on your Toyota RAV4 fourth generation (2013-2018), follow these simple steps. First, enter the cabin and tur…
How to reset the tyre warning light on the 2015 Toyota RAV4
How to reset the tyre warning light on the 2015 Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To manually reset the tyre warning light that stays on the instrument panel of your 2015 Toyota RAV4, simply follow these very easy steps. First, ent…
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short and simple guide, you will learn how to reset the tyre pressure warning light (TPMS) on a Toyota RAV4. Initially, when you turn on the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos