Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the serpentine belt in a Toyota Corolla?

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: V-belt

In this tutorial, we can see how to replace the serpentine belt in the Toyota Corolla, a very simple and quick operation. First of all, make sure that the engine is cool enough, then open the hood and remove the plastic cover. Next, locate the belt in question, located on the right side of the engine, grip the tensioner with a 19mm socket wrench and, by pushing it, loosen the tension to remove the old belt. Finally, position the replacement using the same technique, and following the correct pattern, and reassemble everything.

Posted on 13 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Auxiliary Belt on the Toyota Corolla 1.8 (2015)
Replacing the Auxiliary Belt on the Toyota Corolla 1.8 (2015)
Toyota Corolla (2013-2019 / MK 4, E170, E160) In this video tutorial, you will see the main instructions that will allow you to remove and replace the auxiliary belt on the 2015 Toyota Corolla wi…
Guide to Removing the Timing Chain on a Toyota Corolla VVT-i
Guide to Removing the Timing Chain on a Toyota Corolla VVT-i
Toyota Corolla (2000-2007 / MK 2) This brief guide outlines the main steps to remove and replace the timing chain on a Toyota Corolla. To access the timing chain, you will need to rem…
Guide to Replacing the Timing Belt on the Toyota Corolla 2.0 D-4D
Guide to Replacing the Timing Belt on the Toyota Corolla 2.0 D-4D
Toyota Corolla (2000-2007 / MK 2) Today's instructions will allow you to remove and replace the timing belt on the Toyota Corolla 2.0 D-4D. First, raise the vehicle and begin by remov…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos