Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diagram and positioning of the fuses in the Toyota Prius

Model: Toyota Prius MK 3, Xw50 - Years 2016-2023
Part: Fuse box

Following these brief steps, we will see how to locate the fuse diagram and their positioning on the Toyota Prius. First, we open the front driver's side door and begin to remove the plastic cover next to the steering wheel, thus finding the internal fuse box; in the engine compartment, we find another fuse box, removing the plastic cover found at the top right, as shown in the video. At this point, we find on the sliding guide the fuse diagram, with all the codes and amperages associated (useful for any replacement).

Posted on 18 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Fuse schema and positioning of the Toyota Prius
Fuse schema and positioning of the Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) The following steps will show us the layout and positioning of the fuse boxes of the Toyota Prius. First, we get into the car on the passenger side a…
Where is the interior fuse box on the Toyota Prius
Where is the interior fuse box on the Toyota Prius
Toyota Prius (2009-2015 / MK 2, Xw30) If you have a Toyota Prius Mk2 and you want to know where the internal fuse box is located, you just have to read the following mini-guide carefully …
What is the fuse diagram for the Toyota Prius?
What is the fuse diagram for the Toyota Prius?
Toyota Prius (2009-2015 / MK 2, Xw30) In this video we can see where the fuse boxes of the Toyota Prius are located and what are their respective diagrams, to consult in case we need to c…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos