Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Toyota CH-R

Model: Toyota C Hr Ax50, MK 1, Ax10 - Years 2016-2023
Part: Tire pressure warning light

Let's discover in a few simple steps the procedure for resetting the tire pressure monitoring system (TPMS) light on the Toyota CH-R; before performing the reset, it is necessary that all four tires are at the correct pressure. Then, get into the car and go to the settings on the onboard computer, accessing them with the buttons located on the right side of the steering wheel; once on the tire pressure option, it will be possible to enter it to confirm and perform the reset (by pressing the ok button), as shown in the video. Finally, check that the TPMS light has been permanently reset on the instrument panel!

Posted on 12 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Toyota C-HR?
How to Reset the Tyre Pressure Warning Light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To reset the tyre pressure warning light on the Toyota C-HR, you need to bring all tyres to the recommended inflation pressure: this value can be fou…
How to Reset the Tyre Pressure Light on the Toyota CH-R
How to Reset the Tyre Pressure Light on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) Below are the instructions to reset the tyre pressure light on the Toyota CH-R; before resetting the TPMS sensors, ensure all four tyres are at the c…
How to reset the tyre pressure warning light on the Toyota C-HR?
How to reset the tyre pressure warning light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax50, MK 1, Ax10) To reset the tyre pressure warning light on the Toyota C-HR, first ensure all tyres are at the correct inflation pressure. Once the pressure is verif…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos