Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel pump of the Yamaha Majesty?

Model: (Various brands) Various
Part: Fuel pump

Let's see specifically how to replace the fuel pump, which could burn out over time, of a motorcycle, specifying that in this case the video shows a Yamaha Majesty 400, but this principle is correct and adaptable to other maxi scooters as well. The protagonist of the aforementioned video has removed all the plastic fairings and to work more comfortably, has separated the iron part of the frame from the aluminum one. The aforementioned pump is located under the seat, on the left side, so once reached, the power cables, the fuel inlet and outlet tubes are disconnected and finally the locking pins are unscrewed. Once the new one is installed, everything is reassembled following the reverse procedure.

Posted on 4 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug on a Yamaha Majesty 250 Motorcycle
How to Replace the Spark Plug on a Yamaha Majesty 250 Motorcycle
(Various brands) Various To change the spark plug on the Yamaha Majesty 250 motorcycle, remove the under-seat panel by unscrewing the four 10mm bolts as shown in the video. T…
How to refuel a vehicle with gasoline
(Various brands) Various Today we will explain how to refuel with self-service using cash. First, we open the fuel tank door and unscrew the cap counterclockwise. We position…
How to Empty the Fuel Tank
How to Empty the Fuel Tank
(Various brands) Various Sometimes it may be necessary to empty the fuel tank, for example, in the case of incorrect refuelling (petrol instead of diesel or vice versa). If y…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos