Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from a Vehicle

Model: (Various brands) Various
Part: Starter motor

Video tutorial

To remove the starter motor from a vehicle, start by opening the front bonnet and locating the securing nut for the starter motor. Usually, there are two locking nuts, one on the lower side and the other on the upper side.

Using a ratchet spanner, undo the bolt of the lower nut and then the upper nut, holding the starter motor firmly as a fall could damage it and complicate repairs. Remove the starter motor and proceed with the inspection.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

Removing the Car Starter Motor
Removing the Car Starter Motor
(Various brands) Various Is the starter motor on your car showing no signs of operation? Here's how to remove it from the engine bay. Disconnect the starter motor power termi…
How to Replace the Starter Motor on the Ape 50
How to Replace the Starter Motor on the Ape 50
(Various brands) Various In this video tutorial, see how to replace the starter motor on the Ape 50 by following a few simple steps: the first thing to do is to purchase a ne…
Replacing the Starter Motor
Replacing the Starter Motor
(Various brands) Various Want to replace the starter motor in your car? Here’s how to remove the damaged part from the engine bay. Lift the front bonnet to access the starter…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos