Do it yourself
Frequently asked questions about cars and motorcycles

How to refill AdBlue and turn off the warning light

Model: (Various brands) Various
Part: AdBlue warning light

In this video we can see how to refuel AdBlue: we need a can of AdBlue and a pair of gloves: we recommend not to skimp on this additive, because the poor quality of urea negatively affects the operation of diesel engines. Locate the AdBlue liquid tank; most cars have it next to the diesel tank cap, but some cars have it inside the trunk, often under the carpet covering the spare wheel or tire inflation tools. Connect the funnel to the container of liquids and pour the amount prescribed by the manufacturer into the tank; the warning light may take a few minutes to turn off.

Posted on 10 December 2024 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various The red AdBlue warning light comes on when the AdBlue level in the dedicated tank is depleted. AdBlue (urea and deionised water) is injected into the…
(Various brands) Various Today's video tutorial will show you the steps to reset the AdBlue warning light in your car. The first step is to turn on the car's instrument panel…
(Various brands) Various To reset the AdBlue warning light using the VCDS diagnostic system, follow the instructions below and refer to the video. First, connect your PC to t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos