Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the engine and Service warning light in the KTM 390?

Model: (Various brands) Various
Part: Service warning light

Video tutorial

It is normal for the dashboard warning lights to come on over time, just like for cars, the same applies to motorcycles. In this video we see how to reset the Service light, but the principle and sequence is also the same for resetting the engine light.

The procedure is as follows: Turn on the dashboard, press the Mode button for the ODO display mode, press the Set button to display the remaining km until the next service, and press the Set button again, held down for 15 seconds, to clear the light, finally turning off the dashboard.

Any warning light, as we mentioned before, including the engine malfunction light, is managed and turned off with the Mode and Set buttons.


Posted on 21 January 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on KTM Duke 390
How to Reset the Service Light on KTM Duke 390
(Various brands) Various In this short video tutorial, you can see how to reset the service light on the KTM Duke 390. The first step is to change the engine oil and filters.…
How do you reset the service light on the KTM 1290?
How do you reset the service light on the KTM 1290?
(Various brands) Various The reset of the service light on the KTM 1290 motorcycle, just like in cars, does not require going to the workshop to be done, as it can be done in…
How to Reset the Service Light on the KTM 790?
How to Reset the Service Light on the KTM 790?
(Various brands) Various The KTM 790 motorcycle is equipped with a Service light, accompanied by a message on the onboard computer, which warns of the service due date. Once …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How do you reset the Sym Fiddle's oil warning light? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos