Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Holden Commodore?

Model: (Various brands) Various
Part: Service warning light

Video tutorial

You can reset the Service light on the Holden Commodore by turning on the ignition, inserting the key into the ignition switch. This will show that the light is on. The ignition should then be turned off, and while it is off, press and hold the SET/CLR button located on the right side of the steering wheel.

While holding the button, reinsert the key into the ignition and turn it to the on position. Wait a few seconds for the light to turn off completely.


Posted on 28 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Commodore VE?
How to Reset the Service Light on the Commodore VE?
(Various brands) Various To reset the Service light on the Commodore VE, press and hold the TRIP button located on the left spoke of the steering wheel while the instrument c…
How to Change the Interior Lights on a Holden Commodore
How to Change the Interior Lights on a Holden Commodore
(Various brands) Various In this video, see how to replace the interior lights of a Holden Commodore: always ensure the vehicle is turned off. Using a flat-head screwdriver (…
Resetting the Service Light on the Proton X50
Resetting the Service Light on the Proton X50
(Various brands) Various The instructions in this guide will allow you to reset the service light on the Proton X50. First, get into the vehicle and connect your diagnostic t…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How do you reset the Sym Fiddle's oil warning light? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos