Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove water from the rear light

Model: (Various brands) Various
Part: Tail light

In this video, we can see how it is possible to remove the water that has accumulated in the rear headlight without resorting to the expensive treatments of a body shop; if necessary, we can do it even while traveling. We see that the water is contained in the headlight, we see it swaying. What to do then? We take a not too big screw and with a screwdriver we press it against the headlight that contains the water, until we touch the plastic of the headlight. Then we heat the tip of the screw with a lighter and continue to push it inside the cavity already made until we make a tiny hole, from which the water can come out without damaging the optical group in any way.

Posted on 13 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Dents from Car Bodywork
How to Remove Dents from Car Bodywork
(Various brands) Various To remove dents from car bodywork, there are methods that can be done independently. To implement them, you will need to fill two bowls with water: o…
What is the purpose of the oil-water heat exchanger in a car?
What is the purpose of the oil-water heat exchanger in a car?
(Various brands) Various What is the purpose of the oil-water heat exchanger? It serves the same function as the engine cooling radiator, which is why it is also called an oi…
Function and Maintenance of the Diesel Fuel Filter
Function and Maintenance of the Diesel Fuel Filter
(Various brands) Various In this video, we will see the characteristics of a good diesel fuel filter, whose main function is to separate water particles from the fuel. Althou…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos