Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the passenger side airbag on the car

Model: (Various brands) Various
Part: Airbag

Disabling the passenger side airbag on a vehicle is a simple and quick operation to perform independently, thanks also to our very short video tutorial that will illustrate the steps to follow. To deactivate the airbag system, we must open the passenger side door and then move the lever on the side panel to the "OFF" position. The message "AIRBAG OFF" will be displayed on the instrument panel. To activate the passenger side airbag, we must move the lever on the side panel to the "ON" position. The message "AIRBAG ON" will be displayed on the instrument panel.

Posted on 23 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate the passenger side airbag?
How to deactivate the passenger side airbag?
(Various brands) Various There are various ways to deactivate the passenger side airbag and they vary depending on the model and type of vehicle. On some vehicles, to deactiv…
How to deactivate the passenger airbag
How to deactivate the passenger airbag
(Various brands) Various In general, every car has a passenger airbag activator. It is indicated by a red switch which, in general, we can find on the dashboard on the passen…
Reasons to Deactivate the Front Passenger Airbag
Reasons to Deactivate the Front Passenger Airbag
(Various brands) Various There are reasons why it is mandatory to deactivate the front passenger airbag. Typically, this switch is located on the outer side of the dashboard,…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos