Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the passenger side airbag?

Model: (Various brands) Various
Part: Airbag

There are various ways to deactivate the passenger side airbag and they vary depending on the model and type of vehicle. On some vehicles, to deactivate the safety system during accidents, it is necessary to disconnect the connector, if it is the passenger's fuse you will have to move the seat and disconnect the connector underneath. On other vehicles, you just need to remove the side panel of the dashboard to move the lever to OFF. On others, as shown in the video, to deactivate the airbag we need to open the passenger side glove compartment and insert the ignition key into the lock inside and turn the key to OFF.

Posted on 11 June 2024 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In today's video, see how to disable the passenger side airbag in vehicles. This device has been commonly present in cars since the early 2000s, but …
(Various brands) Various In general, every car has an airbag activator for the passenger. It is indicated by a red switch, usually found on the dashboard on the passenger sid…
(Various brands) Various There are reasons why it is mandatory to deactivate the front passenger airbag. Typically, this switch is located on the outer side of the dashboard,…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos