Do it yourself
Frequently asked questions about cars and motorcycles

A trick to remove the oil filter without getting dirty.

Model: (Various brands) Various
Part: Oil filter

Video tutorial

In this video we can see a trick to remove the oil filter without getting our hands dirty. First of all, our car must have the filter in a position that can be removed from below (which is the position of most cars) and then we must find a container large enough to contain it and that can still allow us to turn the filter thread.

This way the filter will remain inside the container (ideally it should be transparent, like the one seen in the video) so when the oil inside it starts to flow out, we will see it and it will remain inside the container.


Posted on 31 March 2025 by ScegliAuto


Related tutorials

(Various brands) Various A tip for those who have the oil filter on the bottom of the car, and are tired of opening the filter and getting the old oil all over their jacket s…
(Various brands) Various Here is the procedure to avoid getting your hands too dirty when removing the oil sump plug: First, wear disposable gloves, then loosen the plug with…
(Various brands) Various In this video we see an absolutely brilliant way to bleed the clutch oil without making a mess. The youtuber - who clearly has familiarity with these…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos