Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to use the tire inflation devices available at gas stations

Model: (Various brands) Various
Part: Tires

In this video we will see how to use the tire inflation devices that are found at gas stations: first of all, we check the tire pressure recommended by the manufacturer, which is located on the door jamb on the driver's side. On this plate, the pressures can be expressed in Kpa (kilopascal, universal measurement), in PSI (pounds per square inch, measurement used in Anglo-Saxon countries) or in Bar, a measurement used in the European Union. Now we go to the air pump and set the desired pressure: at the end of the hose we have a connector that we will attach to the tire valve. Remove the dust cap and attach the connector while holding down the side button: when it reaches the set pressure, we hear a confirmation sound. Remove the valve and the job is done. Put the dust cap back on and repeat for the other tires. Once finished, reattach the hose to its place and that's it.

Posted on 12 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Check Tyre Pressure
How to Check Tyre Pressure
(Various brands) Various Maintaining proper tyre pressure is essential. Not only does it wear out faster, but it also increases fuel consumption. You should check the tyre pr…
How to Top Up AdBlue?
How to Top Up AdBlue?
(Various brands) Various Topping up AdBlue, the additive used in all modern diesel vehicles, is not a daunting task. In fact, it is such a straightforward operation that anyo…
What is AdBlue and how do you refill it in the vehicle's tank?
What is AdBlue and how do you refill it in the vehicle's tank?
(Various brands) Various AdBlue is an additive composed of an aqueous solution of urea that, through chemical reduction, transforms nitrogen oxides into nitrogen and water. T…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos