Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to revise the noisy gearbox of a Microcar

Model: (Various brands) Microcar
Part: Transmission

Video tutorial

In this video we see how to overhaul the gearbox of a Microcar Casalini - but the procedure is the same for all gearboxes of these small cars - which also leaks oil: in fact, all the oil seals must be replaced, as well as the bearings. It is an operation that must be done on a workbench, so we have to remove the gearbox block from the car, then open it and remove the internal gears, in order to be able to remove the bearings which are the 6205-c (1 piece), the 6204 and the 6206 (both two pieces) and the 6304 (1 piece); we clean all the gears well, remove the oil seals, clean the cup and then reassemble everything.

We position the RPM sensor and then put the gasket on using the paste. We put on the cover and bolt it on; we reposition the flywheel and we can reassemble.


Posted on 19 April 2025 by ScegliAuto


Related tutorials

The fuses of the microcar MC2, where are they located?
The fuses of the microcar MC2, where are they located?
(Various brands) Microcar The Microcar MC2, which we see in the attached video, offers us the opportunity to consult the fuse boxes present in it, thanks to the wiring diagram…
What is the fuse diagram for the 2009 Microcar Mgo?
What is the fuse diagram for the 2009 Microcar Mgo?
(Various brands) Microcar The Mgo of 2009, belonging to the Microcar category, presented in the video, is, as usual, equipped with fuses dedicated to the protection of each in…
Reset the Service Light on a Microcar M-8
Reset the Service Light on a Microcar M-8
(Various brands) Microcar This guide outlines the main instructions for resetting the service light for the engine oil change on a Microcar M-8. First, get inside the vehicle …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos