Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the vehicle's battery

Model: (Various brands) Various
Part: Battery

Video tutorial

Today we will explain how to replace the vehicle's battery on your own. This operation is quite simple and quick to perform independently because the steps are the same for all vehicles on the market. To replace the battery, we need to open the front hood of the vehicle and use a screwdriver to unscrew the bracket that holds the battery in place, but be careful because the bracket is not present in all vehicles.

Once the bracket, if present, is removed, we can disconnect the negative terminal clamp and then the positive terminal clamp. Never interchange the order of these two steps because disconnecting the positive terminal first could damage the vehicle.

We then insert the new battery and connect the positive terminal clamp first and immediately after the negative terminal clamp, the steps for this operation should also never be interchanged.


Posted on 2 May 2025 by ScegliAuto


Related tutorials

(Various brands) Various How do you change the battery in your car key? Let’s look at the disassembly and replacement of the damaged battery. Open the bonnet and locate the b…
(Various brands) Various In this video tutorial, you will see how to replace your car battery by following a few simple steps. First, purchase a battery with the same amperag…
(Various brands) Various To change the battery on the Yamaha Xmax, start by opening the front panel. Use a screwdriver to remove the 2 screws securing the cover. Once the cov…

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the battery located in the Sym Jet X? Read answer
    • Vari - Where is the battery located in the Piaggio Beverly? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer
    • Vari - Where is the battery of my Piaggio Medley 150? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos