Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the battery for the Nice garage remote control.

Model: (Various brands) Various
Part: Key

Video tutorial

If the Nice remote control that controls the opening and closing of the garage door no longer functions, the cause may be the battery that powers it, which has been depleted over time and use. To replace it, take the remote control, use a small screwdriver to open it in the central groove on the edge where the key ring is located, separate the two halves and access the battery to be removed.

Insert a new 23A 12v battery, respecting the correct polarity, join the two halves in the slots and press firmly to lock them.


Posted on 18 May 2025 by ScegliAuto


Related tutorials

How to replace the battery of the Nice Inti2 remote control
How to replace the battery of the Nice Inti2 remote control
(Various brands) Various In this video, we will see how to change the battery of the Nice Inti2 remote control, which is a device that allows you to remotely control the open…
How to change the battery of the Nice FLO2RE remote control
How to change the battery of the Nice FLO2RE remote control
(Various brands) Various In this video we can see how to change the battery of the Nice remote control, which is an electronic device used to remotely control various automat…
How to change the battery of the Nice Era - Inti gate remote control
How to change the battery of the Nice Era - Inti gate remote control
(Various brands) Various In this video we see how to change the battery of the Nice Era-inti gate remote control. This remote control allows us to open and close our electric…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos