Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove rust from vehicles

Model: (Various brands) Various
Part: Body

Video tutorial

The main causes of rust appearing on the vehicle body are due to the corrosion of certain areas that are often damaged by stones and gravel bouncing off the vehicle, which can scratch it. Other causes are to be blamed on sudden changes in climate, as going from very cold to very hot temperatures increases the risk of corrosion.

Another cause is the loss of properties of anti-corrosion products used as protective coating on the bodywork.

If you want to repair the parts damaged by rust, the products to buy are: degreaser, putty, spatulas, sandpaper, insulating tape, polishing paste, paint, lacquer, and rust inhibitor. Sand the affected area with coarse sandpaper until the metal layer appears, apply the rust inhibitor to the affected area and mix putty and hardener.

Apply the product and smooth the surface, cover the areas not to be treated with paper, degrease and prepare the area. Using fine sandpaper, sand the surface to make it smooth and even.

Apply a layer of paint and lacquer if necessary. Finish with polishing.

Although corrosion is inevitable, there are still tricks that allow us to prevent corrosion. Among these, frequently check the bodywork, remove deposited dirt, and treat the areas with anti-corrosion products.


Posted on 20 August 2025 by ScegliAuto


Related tutorials

How to Remove Rust and Paint a Wheel Rim?
How to Remove Rust and Paint a Wheel Rim?
(Various brands) Various If you want a refined and clean appearance for your car, you must also take care of the wheel rims as they can be damaged by water, impacts, and wear…
How to prevent rust on your car
How to prevent rust on your car
(Various brands) Various Today, here are the five best tips to prevent rust on your car. The first tip is to clean the body drainage holes. All vehicles have water drainage c…
A Way to Remove Rust from the Bodywork
A Way to Remove Rust from the Bodywork
(Various brands) Various If the bodywork of your vehicle has suffered a small impact that has removed the paint layer, this will expose the metal sheet to rust. If you do not…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos