|
Do it yourself
| |||
| ||||
How do you install snow chains
Model: (Various brands) Various
How do you mount snow chains if you don't have winter tires? Lay the chains on the ground near the wheel, making sure they are not twisted, and pass them under the tire, centering them well. Connect the two main hooks on the top of the tread (outer side of the wheel); make sure the chain adheres evenly to the tire. Attach the side straps (if present) to distribute the tension evenly. Pull the tension joints (which are usually elastic hooks or lever tensioners) until you achieve a uniform tension on the entire wheel. Check that the chain is tight and not hanging. Make sure it does not touch brakes, fenders, or mechanical parts. Drive a few meters and then stop for a final tension check. If necessary, tighten; in fact, chains tend to loosen in the first few meters of driving. The chains (mounted on the drive wheels!) should be removed as soon as they are no longer needed and rinsed with water to remove salt and gravel. They should then be dried before storing them to prevent rusting.
Posted on 9 November 2025 by ScegliAuto
Video tutorial
Related tutorials
(Various brands) Various
To be able to mount snow chains on any car, you will need to retrieve the chains themselves and fully open them so that they can be arranged around t…
(Various brands) Various
It will be possible to install snow chains on any vehicle by fully opening the chains so that they can be placed around the corresponding wheels: the…
(Various brands) Various
Today, learn how to fit snow chains on a vehicle's tyres by yourself. Before fitting the chains, check the width, diameter, and height of the tyre to…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.214
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |