Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the tire pressure of the vehicle before hitting the road.

Model: (Various brands) Various
Part: Checks and maintenance

The following video tutorial will show us the steps to check the tire pressure on a car before starting a journey. To check the tire pressure, we need to use a pressure gauge that should be inserted into the inflation valve. It is important to remember that the measurement should always be done when the tires are cold, and it is considered correct if it is 2.45 bar. If we measure the tire pressure after driving, it will rise to 2.75 bar because the air inside heats up and expands, increasing the pressure.

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust tire pressure?
How to adjust tire pressure?
(Various brands) Various Adjusting the tire pressure when the warning light comes on or simply before setting off on a car trip is a really simple and quick operation to perf…
How to Replace the Tyre Pressure Sensors on Your Vehicle
How to Replace the Tyre Pressure Sensors on Your Vehicle
(Various brands) Various When the tyre pressure warning light activates on a vehicle, it means you need to check the tyre pressures and adjust them using an air compressor an…
How to check tire pressure
How to check tire pressure
(Various brands) Various In this video we see how most cars actually travel on the road with the wrong tire pressure. Fortunately, those of the latest generation have the TPM…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos