Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove a broken key from the car ignition

Model: (Various brands) Various
Part: Key

Video tutorial

To extract a broken key from a car ignition, there are several methods: the most classic is the one shown in the video, using a thin, rigid metal wire (a straightened coat hanger or a very small hand drill bit). Cut long pieces of wire so you can handle them easily; the tip should be straight and smooth.

On either side of the ignition cylinder, there are two small holes; these are the access points for the release pins.

Insert a wire into each of the two holes: you will feel slight resistance as the wire presses against the safety pin. Push on the pins that hold the cylinder, and while holding the wires, pull the key fragment outwards with your other hand. As soon as the fragment is out enough to grasp, use long-nosed pliers to extract it completely.


Posted on 6 May 2026 by ScegliAuto


Related tutorials

How to Extract a Broken Key from a Lock
How to Extract a Broken Key from a Lock
(Various brands) Various The video we see is not specific to a vehicle, but the situation can also occur in a car. In fact, if it happens in a car, it is particularly critica…
Removing a Faulty Interior Light from the Car
Removing a Faulty Interior Light from the Car
(Various brands) Various Let's see how to remove a faulty, broken interior light from the car. Use a screwdriver to pry between the light lens and the plastic edge (without b…
How to Remove a Broken Spark Plug
How to Remove a Broken Spark Plug
(Various brands) Various If you have tried to unscrew it and it has broken, you will have the lower part (threaded with the electrode) still inside the engine and the upper p…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos